Find a Service Center
- Radial Shaft Seal
- 990.6 mm Shaft Diameter
- 1041.603 mm Housing Bore Diameter
- 22.22 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Case Construction | Steel Case w/Inner Case |
| Pressure | 15 psi |
| Seal Application | General Purpose |
| Seal Design | Molded Design |
| Shaft Dia. | 990.6 mm |
| Surface Speed [Nom] | 5,000 ft/min |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -40 °F |
| Construction | HDS2 |
| Temp Description | w/6 Lugs |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Housing Bore Dia. | 1041.603 mm |
| Inch/Metric | Metric |
| Temperature Range [Max] | 250 °F |
| Lip Type | Single Lip w/Spring |
| Weight | 13.662 LB |
| EAN or UPC | 85311148566 |
