Find a Service Center
- Radial Shaft Seal
- 910 mm Shaft Diameter
- 967.13 mm Housing Bore Diameter
- 17.86 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Metric |
| Construction | HDS2 |
| Shaft Dia. | 910 mm |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip w/Spring |
| Surface Speed [Nom] | 5,000 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Pressure | 15 psi |
| Housing Bore Dia. | 967.13 mm |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | Molded Design |
| Seal Application | General Purpose |
| Temperature Range [Max] | 250 °F |
| Temperature Range [Min] | -40 °F |
| Lip Material | Duralip (Carboxylated Nitrile) |
| Lip Style | Internal |
| Weight | 19.567 LB |
| EAN or UPC | 85311178983 |
