Find a Service Center
Alternate Products
- 25 mm ID x 62 mm OD x 1" Wide
- Double Shielded (Non-Contact)
- ABEC 1
- Standard Cage
- Normal Clearance
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Seal Type | Non-Contact Seals |
| No. in Set | Single Bearing |
| Material | Steel |
| Inner Ring Width | 1 in, 25.4 mm |
| Precision | Standard |
| Limiting Speed - Oil | 10000 rpm |
| Rows of Balls | Double |
| Cage Type | Metal |
| Bore Type | Round Bore |
| Limiting Speed - Sealed | 7500 rpm |
| Width | 1 in, 25.4 mm |
| Flush Ground | No |
| O.D. Type | Straight |
| icNumber | 7696203 |
| Bearing Design | Converging Angle Design |
| Seal Material | Metal |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance | Normal |
| Static Load Rating [Max] | 4590 lbf |
| Limiting Speed - Grease | 7500 rpm |
| Dynamic Load Rating | 6910 lbf |
| Series | 3220 |
| Inch/Metric | Metric Bore |
| Outer Ring Width | 1 in |
| Cage Material | Steel |
| Locking Device | No Locking Device |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance Specification | Normal Clearance |
| Preload Level | None |
| Bearing Type | Angular Contact |
| I.D. | 25 mm |
| Enclosure | Double Shielded |
| Ball Material | Steel |
| Contact Angle | 30° |
| Lubricant | Polyurea Base |
| Capacity | Standard Capacity |
| O.D. | 62 mm |
| Weight | 0.811 LB |
| EAN or UPC | 7316573932147 |
