
- Radial Shaft Seal
- 320 mm Shaft Diameter
- 355 mm Housing Bore Diameter
- 16 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Lip Type | Non-Split |
Inch/Metric | Metric |
Seal Design | Bonded Design |
Seal Application | General Purpose |
Lip Style | Internal |
Lip Material | Nitrile |
Pressure | 10 psi |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Cover/Compensation Ring/Plate Required | No |
Temperature Range [Max] | 250 °F |
Temperature Range [Min] | -40 °F |
Construction | HDS1 |
Spring Material | Carbon Steel Garter |
Shaft Dia. | 320 mm |
Housing Bore Dia. | 355 mm |
Case Construction | Steel Case w/Inner Case |
Weight | 5.101 LB |
EAN or UPC | 85311120005 |
