Find a Service Center
- Radial Shaft Seal
- 793.75 mm Shaft Diameter
- 844.55 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Pressure | 15 psi |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | Molded Design |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 250 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Inch/Metric | Metric |
| Construction | HDS2 |
| Case Construction | Steel Case w/Inner Case |
| Temp Description | w/4 Lugs |
| Lip Style | Internal |
| Housing Bore Dia. | 844.55 mm |
| Lip Material | Nitrile |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 793.75 mm |
| Lip Type | Single Lip w/Spring |
| Weight | 12.422 LB |
| EAN or UPC | 85311144117 |
