Find a Service Center
- Radial Shaft Seal
- 762 mm Shaft Diameter
- 802.79 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Single Lip w/Spring |
| Surface Speed [Nom] | 5,000 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Construction | HDS2 |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Seal Design | Molded Design |
| Shaft Dia. | 762 mm |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 802.79 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Max] | 250 °F |
| Pressure | 15 psi |
| Inch/Metric | Metric |
| Weight | 11.773 LB |
| EAN or UPC | 85311143080 |
