Find a Service Center
- Radial Shaft Seal
- 660.4 mm Shaft Diameter
- 723.9 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Non-Split |
| Inch/Metric | Metric |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Lip Style | Internal |
| Construction | HDS1 |
| Case Construction | Steel Case w/Inner Case w/4 Lugs |
| Seal Design | Bonded Design |
| Temperature Range [Max] | 225 °F |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 660.4 mm |
| Housing Bore Dia. | 723.9 mm |
| Lip Material | Nitrile |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.093 |
| Surface Speed [Nom] | 5,000 ft/min |
| Weight | 10.572 LB |
| EAN or UPC | 85311140560 |
