Find a Service Center
- Radial Shaft Seal
- 654.05 mm Shaft Diameter
- 692.15 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Style | Internal |
| Shaft Dia. | 654.05 mm |
| Construction | HDS2 |
| Inch/Metric | Metric |
| Spring Material | Carbon Steel Garter |
| Pressure | 15 psi |
| Lip Material | Nitrile |
| Housing Bore Dia. | 692.15 mm |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Lip Type | Single Lip w/Spring |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Seal Design | Molded Design |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Max] | 250 °F |
| Weight | 11.761 LB |
| EAN or UPC | 85311140249 |
