Find a Service Center
- Radial Shaft Seal
- 641.35 mm Shaft Diameter
- 692.15 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Inch/Metric | Metric |
| Seal Design | Molded Design |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Nitrile |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 250 °F |
| Lip Type | Single Lip w/Spring |
| Pressure | 15 psi |
| Construction | HDS2 |
| Housing Bore Dia. | 692.15 mm |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 641.35 mm |
| Surface Speed [Nom] | 5,000 ft/min |
| Weight | 9.761 LB |
| EAN or UPC | 85311139854 |
