Find a Service Center
- Radial Shaft Seal
- 463.55 mm Shaft Diameter
- 501.853 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Material | Nitrile |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 463.55 mm |
| Case Construction | Steel Case w/Inner Case |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 501.853 mm |
| Pressure | 15 psi |
| Seal Design | Molded Design |
| Lip Type | Single Lip w/Spring |
| Construction | HDS2 |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Weight | 3.975 LB |
| EAN or UPC | 85311131360 |
