Find a Service Center
- Radial Shaft Seal
- 444.5 mm Shaft Diameter
- 482.6 mm Housing Bore Diameter
- 17.48 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Surface Speed [Nom] | 5,000 ft/min |
| Construction | HDS3 |
| Temp Description | w/4 Adjustable Lugs |
| Seal Application | General Purpose |
| Seal Design | Molded Design |
| Pressure | 15 psi |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 444.5 mm |
| Lip Type | Single Lip w/Spring |
| Housing Bore Dia. | 482.6 mm |
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Inch/Metric | Metric |
| Temperature Range [Max] | 250 °F |
| Temperature Range [Min] | -40 °F |
| Lip Material | Duralip (Carboxylated Nitrile) |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Weight | 6.373 LB |
| EAN or UPC | 85311130011 |
