
- Radial Shaft Seal
- 381 mm Shaft Diameter
- 431.8 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Lip Material | Fluoroelastomer - Viton |
Case Construction | Steel Case w/Inner Case |
Inch/Metric | Metric |
Shaft Dia. | 381 mm |
Seal Application | General Purpose |
Cover/Compensation Ring/Plate Required | No |
Housing Bore Dia. | 431.8 mm |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Temperature Range [Min] | -40 °F |
Spring Material | Carbon Steel Garter |
Lip Style | Internal |
Lip Type | Non-Split |
Construction | HDS1 |
Temperature Range [Max] | 400 °F |
Seal Design | Bonded Design |
Pressure | 10 psi |
Surface Speed [Nom] | 5,000 ft/min |
Weight | 6.294 LB |
EAN or UPC | 85311125727 |
