
- Radial Shaft Seal
- 342.9 mm Shaft Diameter
- 381 mm Housing Bore Diameter
- 17.48 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Lip Style | Internal |
Lip Type | Non-Split |
Case Construction | Steel Case w/Inner Case |
Inch/Metric | Metric |
Spring Material | Carbon Steel Garter |
Housing Bore Dia. | 381 mm |
Pressure | 10 psi |
Lip Material | Nitrile |
Temperature Range [Max] | 250 °F |
Temperature Range [Min] | -40 °F |
Construction | HDS1 |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Cover/Compensation Ring/Plate Required | No |
Shaft Dia. | 342.9 mm |
Seal Design | Bonded Design |
Seal Application | General Purpose |
Weight | 5.411 LB |
EAN or UPC | 85311122047 |
