
- Radial Shaft Seal
- 330.2 mm Shaft Diameter
- 381 mm Housing Bore Diameter
- 25.4 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Construction | HDS1 |
Spring Material | Carbon Steel Garter |
Seal Design | Bonded Design |
Shaft Dia. | 330.2 mm |
Lip Material | Nitrile |
Seal Application | General Purpose |
Pressure | 10 psi |
Case Construction | Steel Case w/Inner Case |
Cover/Compensation Ring/Plate Required | No |
Temperature Range [Max] | 250 °F |
Inch/Metric | Metric |
Lip Type | Non-Split |
Surface Speed [Nom] | 5,000 ft/min |
Temperature Range [Min] | -40 °F |
Lip Style | Internal |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Housing Bore Dia. | 381 mm |
Weight | 5.411 LB |
EAN or UPC | 85311121019 |
