Find a Service Center
- Radial Shaft Seal
- 300 mm Shaft Diameter
- 355.6 mm Housing Bore Diameter
- 19 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Max] | 250 °F |
| Lip Style | Internal |
| Construction | HDS2 |
| Seal Design | Assembled Design |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile |
| Inch/Metric | Metric |
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Type | Single Lip w/Spring |
| Housing Bore Dia. | 355.6 mm |
| Shaft Dia. | 300 mm |
| Case Construction | Steel Case w/Inner Case w/4 Lugs |
| Spring Material | Carbon Steel Garter |
| Weight | 5.111 LB |
| EAN or UPC | 85311117937 |
