Find a Service Center
- Radial Shaft Seal
- 281 mm Shaft Diameter
- 334.98 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Inch/Metric | Metric |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 281 mm |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 5,000 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Case Construction | Steel Case w/Inner Case |
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Lip Material | Nitrile |
| Lip Type | Non-Split |
| Construction | HDS1 |
| Seal Application | General Purpose |
| Housing Bore Dia. | 334.98 mm |
| Temperature Range [Max] | 250 °F |
| Seal Design | Assembled Design |
| Weight | 4.871 LB |
| EAN or UPC | 85311116152 |
