Find a Service Center
- Radial Shaft Seal
- 259.588 mm Shaft Diameter
- 298.653 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Case Construction | Steel Case w/Inner Case |
| Inch/Metric | Metric |
| Lip Style | Internal |
| Pressure | 10 psi |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Max] | 250 °F |
| Seal Design | Assembled Design |
| Construction | HDS1 |
| Seal Application | General Purpose |
| Shaft Dia. | 259.588 mm |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Non-Split |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Housing Bore Dia. | 298.653 mm |
| Lip Material | Nitrile |
| Spring Material | Carbon Steel Garter |
| Weight | 2.051 LB |
| EAN or UPC | 85311113618 |
