ZD2115

2000 Series Spherical Roller Bearing Duplex Unit

Item #101159258

Auto Replenish

each One-time purchase

Product Details

Easy bearing clearance: can be field adjusted to meet application needs
Mounting to suit the load and installation requirements
Shaft ready: prelubricated with standard grease for normal operation
other lubricants available for special conditions
Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
Rugged housing: standard material – cast iron, steel or ductile iron available on request
Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
K seal, for dusty, dirty conditions
and M seal, for protection against liquid contamination
For extra protection under severe conditions, auxiliary caps are also available

Specifications

Housing Material	Cast Iron
Recommended Housing Bore Diameter [Min]	3.545 in
Bore Dia. [Min]	1 7/16 in
Collar O.D.	2 7/8 in
Width Between Flanges [Max]	1.885 in
Length Across Flats	4 in
Flange Pilot Diameter Step Width	3/16 in
Bore Dia. [Max]	4 in
Outer Race Diameter	3.5465 in
Inner Ring Hub Diameter	2 5/16 in
Length Through Bore	3.125 in
Bolt Circle Dia.	4 1/4 in
Bolt Size	3/8 in
Locking Device	Single Setscrew Locking Collar
Shaft Dia.	1.9375 in
Mounting Pad Width	4 in
Bolt Hole Spacing	3 in
Width Between Flanges [Min]	1.865 in
RPM [Max]	4050 rpm
Set Screw Torque	325 in lb
Recommended Housing Bore Diameter [Max]	3.547 in
Size Code	6
Seal Type	Triple Lip Clearance Seals
Collar Extension	21/32 in
Flange Thickness	4 1/2 in
Bearing Type	Spherical Roller Bearing
Series	2000
Temperature Range [Max]	225 °F
Weight	4.6 LB
EAN or UPC	698210710965

Product Comparison