MEP2108

Solid Pillow Block

Item #101488175

Auto Replenish

each One-time purchase

Product Details

Easy bearing clearance: can be field adjusted to meet application needs
Mounting to suit the load and installation requirements
Shaft ready: prelubricated with standard grease for normal operation
other lubricants available for special conditions
Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
Rugged housing: standard material – cast iron, steel or ductile iron available on request
Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
K seal, for dusty, dirty conditions
and M seal, for protection against liquid contamination
For extra protection under severe conditions, auxiliary caps are also available

Specifications

Housing Material	Cast Iron
Length Through Bore	2.875 in
Bearing Type	Spherical Roller Bearing
Bolt Holes	2
Flange Type	2-Bolt Flange
RPM [Max]	3300 rpm
Bearing Design	Fixed
Temperature Range [Max]	200 °F, 225 °F
Size Code	4
Base Height	1 1/4 in
Mounted Unit Duty	Normal-Duty
Inch/Metric	Inch
Grease Fitting Size	1/8 in NPT
Center Line to Base Dimension [Min]	2 1/8 in
Seal Type	Heavy Contact Seals, Spring Loaded Heavy Contact Seals
Base Length	7 7/8 in
Series	2000
Lubrication	Exxon Ronex MP
Temperature Range [Min]	-20 °F
Base Width	2 1/4 in
Housing Height	4 3/8 in
Housing Construction	1 Piece
Shaft Dia.	1.5 in
End Type	Open End
Bolt Hole Spacing	5 7/8 in
Collar Extension	11/16 in
Bolt Hole Spacing Range [Max]	6 1/2 in
Handle / Housing Material	Cast Iron
Insert Type	Steel Insert
Pillow Block Type	Thru-Bolt
Locking Device	Single Setscrew Locking Collar
Bolt Size	1/2 in
Weight	9.5 LB
EAN or UPC	698210688196