Find a Service Center
- Wide Inner Ring Bearing, 6 mm ID x 19 mm OD x 0.5625" Wide, Double Sealed (Labyrinth), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- Fafnir developed Mechani-Seals have been adapted to the 30 metric series for effective grease retention and exclusion of foreign matter. They are available with one Mechani-Seal (suffix L), with one Mechani-Seal and one shield (suffix LD), and with two Mechani-Seals (suffix LL). Because the Mechani-Seal is frictionless, the bearings can be operated at speeds comparable to those at which the open type bearings can run.
| Limiting Speed - Grease | 23530 rpm |
| Width | 14.288 mm |
| Inch/Metric | Metric Bore |
| Limiting Speed - Oil | 27450 rpm |
| Precision | Standard |
| icNumber | 7701355 |
| Radial Internal Clearance Specification | Normal Clearance |
| Ball Material | Steel |
| Seal Type | Labyrinth Seals |
| Inner Ring Width | 0.562 in |
| O.D. | 19 mm |
| Capacity | Standard Capacity |
| Preload Level | None |
| O.D. Type | Straight |
| Origin | Wide Inner Ring |
| Static Load Rating [Max] | 195 lbf |
| Cage Type | Metal |
| Seal Protection Width | 0.428 in |
| Dynamic Load Rating | 560 lbf |
| Temperature Range [Min] | -30 °F |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| Fillet Radius | 0.012 in |
| Material | Steel |
| Contact Angle | 0° |
| I.D. | 6 mm |
| Precision Level | Standard (ABEC 1) |
| Cage Material | Steel |
| Seal O.D. | 0.656 mm |
| Temperature Range [Max] | 275 °F |
| Outer Ring Width | 8 mm |
| Rows of Balls | Single |
| Bore Type | Round Bore |
| Locking Device | No Locking Device |
| Radial Internal Clearance | Normal |
| Lubricant | Polyurea Base |
| Seal Material | Rubber |
| Enclosure | Double Sealed |
| Weight | 0.03 LB |
| EAN or UPC | 637400593353 |
