Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Mines
Aggregate plants
features
Lubrication recommended
Wiring Options
None
Coil Style
Encapsulated
Port Type
NPT
Basic Size
1 in
Cv Flow
11.3
Operator
Solenoid w/Light & Locking Override
Overrides
No Overrides
Operation
Electric
Port Size
1
Valve Size
1 in
Actuator Type
Solenoid
Length
10.460 in
Valve Type
4-Way, 2 Position
Voltage Rating
120 VAC, 60 Hz
Solenoid
Single
Stations
N/A
Lights
Yes
Height
8.740 in
Spool Description
N/A
Return Type
Spring
Valve Duty
Standard Duty
Installed Options
None
Series
Valvair II Series
Valve Body Style
Manifold Mounted
Operating Pressure Range
35 psi to 140 psi
Weight
11.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
