Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
features
Lubrication recommended
Return Type
Spring
Operating Pressure Range
35 psi to 140 psi
Actuator Type
Solenoid
Basic Size
3/8 in
Port Type
NPT
Lights
Yes
Solenoid
Single
Stations
N/A
Coil Style
Encapsulated
Spool Description
N/A
Length
10.460 in
Valve Body Style
Manifold Mounted
Overrides
No Overrides
Operator
Solenoid w/Light & Locking Override
Port Size
3/8
Valve Size
3/8 in
Operation
Electric
Valve Duty
Standard Duty
Height
8.740 in
Installed Options
None
Voltage Rating
120 VAC, 60 Hz
Valve Type
4-Way, 2 Position
Series
Valvair II Series
Cv Flow
4.8
Wiring Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
