Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
caution
Do not restrict the inlet flow
Operation
Electric
Actuator Type
Solenoid
Wiring Options
None
Spool Description
All Ports Blocked
Cv Flow
11.3
Operator
Solenoid w/Light & Locking Override
Length
13.620 in
Valve Size
1 in
Voltage Rating
24 VDC
Lights
Yes
Valve Type
4-Way, 3 Position
Overrides
No Overrides
Solenoid
Double
Return Type
Solenoid
Stations
N/A
Valve Body Style
Manifold Mounted
Operating Pressure Range
35 psi to 140 psi
Port Type
NPT
Height
8.740 in
Port Size
1
Installed Options
None
Series
Valvair II Series
Coil Style
Encapsulated
Basic Size
1 in
Valve Duty
Standard Duty
Weight
15.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
