Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 6" Stroke
- Stainless Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Cylinder cushions
- Adjustable stop collars
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Support Rod Diameter | 30 mm |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Proximity Sensor | No Proximity Sensor |
| Weight per Inch | 0.85 lb |
| Slide Orientation | Right Hand (Standard) |
| Series | HBT |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Shock Absorbers - Slide | No Shock Absorber |
| Cylinder Bore Size | 2.5 in |
| Port Type | NPTF |
| Temperature Range [Max] | 165 °F |
| Cylinder Seal Material | Buna-N |
| Positions | 2 Position |
| Slide Type | Thrust Slide |
| Base Wt. | 24.45 lb |
| Port Location | Standard (Position 1) |
| Bearing Type | Composite Bearing |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Intermediate Stroke | N/A |
| Pressure [Max] | 150 psi |
| Cushions - Slide | No Cushions |
| Support Rod Material | Stainless Steel |
| Temperature Range [Min] | 0 °F |
| Stroke | 6 in |
| Flow Controls | w/o Flow Controls |
| Proximity Sensor Code | None |
| Port Size | 3/8 |
| Slide Configuration Option Code | B4 |
| Weight | 29.55 LB |
