Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 6" Stroke
- Stainless Steel Rails
- Composite Bearing
- 2" Bore 2MA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Bearing Type | Composite Bearing |
| Intermediate Stroke | N/A |
| Shock Absorbers - Slide | No Shock Absorber |
| Flow Controls | w/o Flow Controls |
| Temperature Range [Max] | 165 °F |
| Support Rod Material | Stainless Steel |
| Proximity Sensor | No Proximity Sensor |
| Temperature Range [Min] | 0 °F |
| Proximity Sensor Code | None |
| Slide Orientation | Right Hand (Standard) |
| Port Size | 3/8 |
| Base Wt. | 14.35 lb |
| Cushions - Slide | Cushioned (Both Ends) |
| Port Type | NPTF |
| Weight per Inch | 0.64 lb |
| Port Location | Standard (Position 1) |
| Cylinder Seal Material | Buna-N |
| Slide Type | Thrust Slide |
| Cylinder Type | 2MA Pneumatic Cylinder |
| Series | HBT |
| Stroke | 6 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cylinder Bore Size | 2 in |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Pressure [Max] | 150 psi |
| Support Rod Diameter | 25 mm |
| Positions | 2 Position |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Slide Configuration Option Code | C, B4 |
| Weight | 18.19 LB |
