The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Cylinder Type
NFPA Hydraulic Cylinder
Weight per Inch
0.63 lb
Positions
2 Position
Temperature Range [Min]
0 °F
Cylinder Seal Material
Buna-N
Slide Configuration Option Code
B4
Cushions - Slide
No Cushions
Pressure [Max]
750 psi
Slide Type
Thrust Slide
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Both Ends)
Support Rod Diameter
25 mm
Dowel Pin Holes
w/o Dowel Pin Holes
Proximity Sensor
No Proximity Sensor
Support Rod Material
Steel
Temperature Range [Max]
165 °F
Stroke
8 in
Proximity Sensor Code
None
Shock Absorbers - Slide
No Shock Absorber
Port Type
NPTF
Series
HBT
Base Wt.
9.83 lb
Slide Orientation
Right Hand (Standard)
Intermediate Stroke
N/A
Port Size
1/4
Bearing Type
Composite Bearing w/Oversized Support Rods
Port Location
Standard (Position 1)
Cylinder Bore Size
1.5 in
Flow Controls
w/o Flow Controls
Stroke Tolerance
+0.030 in / -0.000 in
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
