The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Cylinder Type
NFPA Hydraulic Cylinder
Stroke
6 in
Bearing Type
Composite Bearing w/Oversized Support Rods
Series
HBT
Slide Type
Thrust Slide
Temperature Range [Min]
0 °F
Cushions - Slide
Cushioned (Both Ends)
Port Location
Standard (Position 1)
Port Type
NPTF
Temperature Range [Max]
165 °F
Cylinder Seal Material
Buna-N
Base Wt.
9.83 lb
Shock Absorbers - Slide
No Shock Absorber
Weight per Inch
0.63 lb
Support Rod Diameter
25 mm
Slide Configuration Option Code
B2, C
Cylinder Bore Size
1.5 in
Intermediate Stroke
N/A
Port Size
1/4
Proximity Sensor
No Proximity Sensor
Flow Controls
w/Flow Controls (PrestolLok)
Slide Orientation
Right Hand (Standard)
Dowel Pin Holes
w/o Dowel Pin Holes
Stroke Tolerance
+0.030 in / -0.000 in
Support Rod Material
Steel
Positions
2 Position
Pressure [Max]
750 psi
Proximity Sensor Code
None
Bumpers - Slide
Bumpers (Retract Only)
Weight
13.61 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
