Parker's four-way. body ported valves are ideal for controlling larger double-acting cylinders and air motors. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. B series valves feature Parker's exclusive Wear Compensation System for millions of nonlubricated cycles. Choose from single- or double-remote pilot control. DIN-style electrical connection.
features
IEM (inlet/exhaust manifold)
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Port Type
NPT
Height
2.590 in
Port Size
1/2
Overrides
Flush - Non-Locking Override
Voltage Rating
120 VAC
Spool Seal Type
Buna-N
Length
11.290 in
Coil Style
15 mm 3-Pin DIN 43650C
Cv Flow
5.7
Wiring Options
None
Series
B7
Actuator Type
Solenoid
Solenoid
Double
Width
1.650 in
Operating Pressure Range
Vacuum to 145 psi
Temperature Range [Max]
120 °F
Temperature Range [Min]
5 °F
Installed Options
None
Valve Type
4-Way, 3 Position Spring Centered
Operation
Electric
Pilot Source
Internal Pilot Supply - Port 1
Engineering Level
A
Return Type
Solenoid
Stations
N/A
Pilot Exhaust
Vented Pilot Exhaust
Valve Duty
Standard Duty
Valve Body Style
Inline
Spool Description
All Ports Blocked
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
