Parker's B3 and B5 series three-way., body ported valves are ideal for controlling larger single-acting cylinders, air bags and vacuum generators. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. Featuring Parker's exclusive Wear Compensation System, expect millions of non-lubricated cycles from this valve. Electrical connections are easy using Parker's 15 mm DIN-style connectors. Flush non-locking overrides are standard.
features
IEM (inlet/exhaust manifold)
Factory prelubricated
CE approved
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Series
B5
Pilot Exhaust
Vented Pilot Exhaust
Length
5.290 in
Operation
Electric
Port Type
NPT
Installed Options
None
Solenoid
Single
Wiring Options
None
Outlet Port
1/4 in NPT
Stations
N/A
Engineering Level
C
Operating Pressure Range
Vacuum to 145 psi
Overrides
Flush - Non-Locking Override
Cv Flow
1.4
Pilot Source
Internal Pilot Supply - Port 1
Actuator Type
Solenoid
Temperature Range [Max]
120 °F
Valve Type
3-Way, 2 Position
Valve Body Style
Inline
Height
2.060 in
Spool Seal Type
Buna-N
Spool Description
Normally Closed
Coil Style
15 mm 3-Pin DIN 43650C
Valve Duty
Standard Duty
Return Type
Spring
Voltage Rating
120 VAC
Temperature Range [Min]
5 °F
Port Size
1/4
Width
1.180 in
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
