Parker's four-way. body ported valves are ideal for controlling larger double-acting cylinders and air motors. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. B series valves feature Parker's exclusive Wear Compensation System for millions of nonlubricated cycles. Choose from single- or double-remote pilot control. DIN-style electrical connection.
features
IEM (inlet/exhaust manifold)
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Operating Pressure Range
Vacuum to 145 psi
Width
1.180 in
Valve Body Style
Inline
Operation
Electric
Port Type
NPT
Actuator Type
Solenoid
Installed Options
None
Height
2.060 in
Coil Style
15 mm 3-Pin DIN 43650C
Solenoid
Double
Series
B5
Valve Duty
Standard Duty
Length
8.450 in
Valve Type
4-Way, 3 Position Spring Centered
Port Size
1/4
Temperature Range [Max]
120 °F
Pilot Exhaust
Vented Pilot Exhaust
Engineering Level
C
Temperature Range [Min]
5 °F
Spool Description
All Ports Blocked
Pilot Source
Internal Pilot Supply - Port 1
Return Type
Solenoid
Overrides
Flush - Non-Locking Override
Voltage Rating
120 VAC
Cv Flow
1.1
Stations
N/A
Wiring Options
None
Spool Seal Type
Buna-N
Weight
2.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
