Find a Service Center
- Ball Bearing
- Pillow Block
- 105 mm Shaft Diameter
- 380 mm Bolt Hole Spacing
| Center of Bearing from Back of Inner Ring | 44 |
| RPM [Max] | 1400 rpm |
| Housing Width | 128 mm |
| Base Width | 120 mm |
| Mounted Unit Duty | Heavy-Duty |
| Shaft Dia. | 105 mm |
| Seal Type | Contact Seals |
| Inch/Metric | Metric |
| Bearing Type | Ball Bearing |
| Dynamic Load Rating | 41500 lbf |
| Lubrication | Relubricatable |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 250 °F |
| Static Load Rating [Max] | 34500 lbf |
| End Type | Open End |
| Base Height | 50 mm |
| Bearing Insert | UC321D1 |
| Shaft Height | 140 mm |
| Housing Construction | 1 Piece |
| Groove Length | 50 |
| Housing Height | 280 mm |
| Series | UCP/UCPX |
| Locking Device | Setscrew Locking Collar |
| Housing No. | P321D1 |
| Housing Material | Cast Iron |
| Bearing Width | 112 mm |
| Bolt Hole Spacing | 380 mm |
| Seal Material | Nitrile Rubber |
| Housing Length | 490 mm |
| Weight | 77.911 LB |
| EAN or UPC | 4547359226935 |
