Find a Service Center
- Ball Bearing
- Pillow Block
- 30 mm Shaft Diameter
- 140 mm Bolt Hole Spacing
| Inch/Metric | Metric |
| Housing Height | 95 mm |
| Groove Length | 20 |
| Housing Construction | 1 Piece |
| Temperature Range [Min] | -40 °F |
| Dynamic Load Rating | 6000 lbf |
| Bearing Width | 43 mm |
| Bearing Type | Ball Bearing |
| Shaft Dia. | 30 mm |
| Bolt Hole Spacing | 140 mm |
| RPM [Max] | 4400 rpm |
| Seal Type | Contact Seals |
| Locking Device | Setscrew Locking Collar |
| Center of Bearing from Back of Inner Ring | 17 |
| Shaft Height | 50 mm |
| Base Height | 18 mm |
| Temperature Range [Max] | 250 °F |
| Bearing Insert | UC306D1 |
| Base Width | 50 mm |
| Housing Material | Cast Iron |
| Mounted Unit Duty | Heavy-Duty |
| Lubrication | Relubricatable |
| Seal Material | Nitrile Rubber |
| Housing Length | 180 mm |
| Housing Width | 50 mm |
| Housing No. | P306D1 |
| Static Load Rating [Max] | 3350 lbf |
| End Type | Open End |
| Series | UCP/UCPX |
| Weight | 4.147 LB |
| EAN or UPC | 4547359001709 |
