Find a Service Center
- Single Row Radial Bearing
- 50 mm ID x 110 mm OD x 27 mm Wide
- Maximum Capacity
- Open
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Corner Radius [Min] | 2 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Cage Material | Pressed Steel |
| Width | 27.000 mm |
| Precision | Standard |
| I.D. | 50 mm |
| Preload Level | None |
| icNumber | 7698860 |
| Rows of Balls | Single |
| Material | Steel |
| O.D. Type | Straight |
| Bore Type | Round Bore |
| O.D. | 110 mm |
| Enclosure | Open |
| Seal Material | None |
| Bearing Type | Radial |
| Radial Internal Clearance | Normal |
| Dynamic Load Rating | 65000 N |
| Snap Ring | No Snap Ring |
| Cage Type | Metal |
| Seal Type | Unsealed |
| Capacity | Maximum Capacity |
| Static Load Rating [Max] | 52500 N |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Limiting Speed - Oil | 7100 rpm |
| Inch/Metric | Metric Bore |
| Outer Ring Width | 27 mm |
| Limiting Speed - Grease | 6000 rpm |
| Weight | 2.205 LB |
| EAN or UPC | 29176000157 |
