Find a Service Center
- Single Row Radial Bearing
- 75 mm ID x 130 mm OD x 25 mm Wide
- Maximum Capacity
- Open
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Cage Type | Metal |
| Outer Ring Width | 25 mm |
| Locking Device | No Locking Device |
| Seal Material | None |
| Inch/Metric | Metric Bore |
| Limiting Speed - Grease | 4500 rpm |
| Limiting Speed - Oil | 5600 rpm |
| I.D. | 75 mm |
| Width | 25.000 mm |
| Precision | Standard |
| Corner Radius [Min] | 1.5 mm |
| O.D. | 130 mm |
| Cage Material | Pressed Steel |
| Bore Type | Round Bore |
| Enclosure | Open |
| Precision Level | Standard (ABEC 1) |
| Capacity | Maximum Capacity |
| O.D. Type | Straight |
| Static Load Rating [Max] | 71500 N |
| Rows of Balls | Single |
| Dynamic Load Rating | 72000 N |
| Preload Level | None |
| icNumber | 7698859 |
| Material | Steel |
| Snap Ring | No Snap Ring |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Normal Clearance |
| Radial Internal Clearance | Normal |
| Seal Type | Unsealed |
| Ball Material | Steel |
| Contact Angle | 0° |
| Weight | 2.778 LB |
| EAN or UPC | 29176038938 |
