6338M

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #101098268

Auto Replenish

each One-time purchase

Alternate Products

SKF 6338 M

Cylindrical Bore Deep Groove Ball Bearing

Item #101171884

each

Compare

FAG 6338-M

Single Row Radial Bearing

Item #100952035

each

Compare

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Snap Ring	No Snap Ring
Cage Type	Metal
Bore Type	Round Bore
Seal Type	Unsealed
Dynamic Load Rating	92,177.00 lbf
Enclosure	Open
Precision	Standard
Width	78 mm
Inner Ring Width	78 mm
Radial Internal Clearance Specification	Normal Clearance
Preload Level	None
Capacity	Standard Capacity
O.D. Type	Straight
Inch/Metric	Metric Bore
Locking Device	No Locking Device
Contact Angle	0°
Material	Steel
icNumber	7699291
Bearing Type	Radial
Corner Radius [Min]	5.00 mm
No. in Set	Single Bearing
Static Load Rating [Max]	93,200.00 lbf
Radial Internal Clearance	Normal
Lubricant	Oil Preservative
Outer Ring Width	78 mm
Precision Level	Standard (ABEC 1)
Ball Material	Steel
Seal Material	None
I.D.	190 mm
Rows of Balls	Single
Limiting Speed - Grease	1400 rpm
O.D.	400.0000 mm
Cage Material	Machined Brass
Limiting Speed - Oil	1700 rpm
Weight	110.699 LB
EAN or UPC	29176018176