6313ZZC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761525

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Seal Type	Non-Contact Seals
O.D.	140.0000 mm
O.D. Type	Straight
Cage Type	Metal
Seal Material	Metal
Snap Ring	No Snap Ring
Limiting Speed - Grease	4800 rpm
Inch/Metric	Metric Bore
Precision	Standard
No. in Set	Single Bearing
Radial Internal Clearance Specification	Greater Than Normal Clearance
Enclosure	Double Shielded
Capacity	Standard Capacity
Inner Ring Width	33 mm
Locking Device	No Locking Device
Dynamic Load Rating	21,835.00 lbf
Radial Internal Clearance	C3
icNumber	7696024
Rows of Balls	Single
Ball Material	Steel
Width	33 mm
Bearing Type	Radial
I.D.	65 mm
Cage Material	Pressed Steel
Precision Level	Standard (ABEC 1)
Contact Angle	0°
Static Load Rating [Max]	13,450.00 lbf
Limiting Speed - Oil	6000 rpm
Preload Level	None
Material	Steel
Bore Type	Round Bore
Lubricant	Mul-Temp SRL
Corner Radius [Min]	2.10 mm
Outer Ring Width	33 mm
Weight	4.63 LB
EAN or UPC	29176017391