6312ZZC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761466

Auto Replenish

Select an Auto-Replenish Interval

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Inner Ring Width	31 mm
Lubricant	Mul-Temp SRL
Radial Internal Clearance	C3
No. in Set	Single Bearing
Outer Ring Width	31 mm
Static Load Rating [Max]	11,680.00 lbf
Rows of Balls	Single
Width	31 mm
Preload Level	None
Limiting Speed - Oil	6300 rpm
O.D. Type	Straight
I.D.	60 mm
Snap Ring	No Snap Ring
Cage Material	Pressed Steel
Material	Steel
Precision	Standard
Capacity	Standard Capacity
Bearing Type	Radial
Limiting Speed - Grease	5300 rpm
Cage Type	Metal
Dynamic Load Rating	19,356.00 lbf
Contact Angle	0°
Inch/Metric	Metric Bore
Locking Device	No Locking Device
Seal Material	Metal
Enclosure	Double Shielded
Ball Material	Steel
Precision Level	Standard (ABEC 1)
Seal Type	Non-Contact Seals
Bore Type	Round Bore
icNumber	7695872
Corner Radius [Min]	2.10 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
O.D.	130.0000 mm
Weight	3.792 LB
EAN or UPC	29176017315