6308DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761236

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Ball Material	Steel
icNumber	7695880
No. in Set	Single Bearing
Limiting Speed - Oil	9000 rpm
Bore Type	Round Bore
Limiting Speed - Grease	5300 rpm
Precision Level	Standard (ABEC 1)
Bearing Type	Radial
Rows of Balls	Single
Seal Material	Buna-N
Contact Angle	0°
Seal Type	Contact Seals
Material	Steel
Dynamic Load Rating	9,560.00 lbf
Precision	Standard
Cage Material	Pressed Steel
Radial Internal Clearance Specification	Greater Than Normal Clearance
Static Load Rating [Max]	5,400.00 lbf
Inch/Metric	Metric Bore
Capacity	Standard Capacity
Enclosure	Double Sealed
Radial Internal Clearance	C3
Lubricant	Mul-Temp SRL
O.D.	90.0000 mm
Width	23 mm
Locking Device	No Locking Device
Outer Ring Width	23 mm
Corner Radius [Min]	1.50 mm
O.D. Type	Straight
Snap Ring	No Snap Ring
Inner Ring Width	23 mm
Cage Type	Metal
I.D.	40 mm
Preload Level	None
Weight	1.418 LB
EAN or UPC	29176065682