6213

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761493

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Seal Material	None
Bore Type	Round Bore
Dynamic Load Rating	13,573.00 lbf
Snap Ring	No Snap Ring
Enclosure	Open
Precision Level	Standard (ABEC 1)
Precision	Standard
Inch/Metric	Metric Bore
Locking Device	No Locking Device
O.D.	120.0000 mm
Contact Angle	0°
Limiting Speed - Grease	5300 rpm
Limiting Speed - Oil	6300 rpm
Bearing Type	Radial
O.D. Type	Straight
Width	23 mm
Radial Internal Clearance Specification	Normal Clearance
Inner Ring Width	23 mm
Outer Ring Width	23 mm
Cage Type	Metal
Lubricant	Oil Preservative
Cage Material	Pressed Steel
Corner Radius [Min]	1.50 mm
Preload Level	None
Rows of Balls	Single
Static Load Rating [Max]	9,010.00 lbf
icNumber	7699314
Seal Type	Unsealed
Material	Steel
Ball Material	Steel
Radial Internal Clearance	Normal
No. in Set	Single Bearing
I.D.	65 mm
Capacity	Standard Capacity
Weight	2.293 LB
EAN or UPC	29176015274