6211ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761390

Auto Replenish

Select an Auto-Replenish Interval

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Precision	Standard
Ball Material	Steel
Locking Device	No Locking Device
Cage Type	Metal
Snap Ring	No Snap Ring
Bore Type	Round Bore
No. in Set	Single Bearing
Seal Type	Non-Contact Seals
Lubricant	Mul-Temp SRL
Radial Internal Clearance	C3
icNumber	7695957
Enclosure	Double Shielded
Preload Level	None
Corner Radius [Min]	1.50 mm
I.D.	55 mm
O.D.	100.0000 mm
Inch/Metric	Metric Bore
Material	Steel
Width	21 mm
Static Load Rating [Max]	6,580.00 lbf
Cage Material	Pressed Steel
Inner Ring Width	21 mm
Limiting Speed - Grease	6300 rpm
Contact Angle	0°
Dynamic Load Rating	10,268.00 lbf
Rows of Balls	Single
Limiting Speed - Oil	7500 rpm
O.D. Type	Straight
Radial Internal Clearance Specification	Greater Than Normal Clearance
Bearing Type	Radial
Seal Material	Metal
Outer Ring Width	21 mm
Capacity	Standard Capacity
Precision Level	Standard (ABEC 1)
Weight	1.338 LB
EAN or UPC	29176015175