6205DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761007

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Enclosure	Double Sealed
Cage Type	Metal
Seal Material	Buna-N
Capacity	Standard Capacity
icNumber	7695910
Material	Steel
Limiting Speed - Oil	15000 rpm
Contact Angle	0°
Dynamic Load Rating	3,147.00 lbf
I.D.	25 mm
Bore Type	Round Bore
Width	15 mm
Static Load Rating [Max]	1,770.00 lbf
Rows of Balls	Single
Snap Ring	No Snap Ring
Bearing Type	Radial
Cage Material	Pressed Steel
Preload Level	None
Outer Ring Width	15 mm
Precision Level	Standard (ABEC 1)
Inner Ring Width	15 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Ball Material	Steel
O.D. Type	Straight
Limiting Speed - Grease	9000 rpm
Corner Radius [Min]	1.00 mm
No. in Set	Single Bearing
O.D.	52.0000 mm
Radial Internal Clearance	C3
Inch/Metric	Metric Bore
Precision	Standard
Locking Device	No Locking Device
Seal Type	Contact Seals
Lubricant	Mul-Temp SRL
Weight	0.282 LB
EAN or UPC	29176064210