Find a Service Center
- Single Row Radial Bearing
- 5/8" ID x 1 5/8" OD x 1/2" Wide
- Single Seal
description
- Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
- Medium loads
- Max speed range - 5000 - 6000 rpm
- Through-hardened bearing steel
- Easy-to-use inch dimensions
- Precision-ground on all contact surfaces
- Nylon retainer standard
- Greased, double-sealed, or double-shielded standard
- Available single sealed or single shielded, open, and with or without grease
- Nylon seals
- Grease packed
- Ground bores
- Improved ball groove finish
| I.D. | 5/8 in |
| Radial Internal Clearance | Normal |
| O.D. | 1.625 in |
| Dynamic Load Rating | 2600 lbf |
| Lubricant | General Purpose |
| Radial Internal Clearance Specification | Normal Clearance |
| Rows of Balls | Single |
| Outer Ring Width | 1/2 in |
| Bearing Type | Radial |
| Material | Steel |
| Width | 1/2 in |
| O.D. Type | Straight |
| Snap Ring | No Snap Ring |
| Cage Type | Plastic |
| Locking Device | No Locking Device |
| Cage Material | Nylon |
| Preload Level | None |
| Bore Type | Round Bore |
| Limiting Speed - Oil | 6000 rpm |
| Seal Material | Rubber |
| Inner Ring Width | 1/2 in |
| Seal Type | Contact Seals |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 1010 lbf |
| Contact Angle | 0° |
| Limiting Speed - Grease | 6000 rpm |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Inch Bore |
| No. in Set | Single Bearing |
| Precision | Standard |
| Enclosure | Single Seal |
| Ball Material | Steel |
| Limiting Speed | 6000 rpm |
| Weight | 0.18 LB |
