Find a Service Center
Alternate Products
MRC Bearing Service
8320
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #101169062
- Single Row Angular Contact Bearing, 100 mm ID x 215 mm OD x 47 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Seal Material | None |
| O.D. | 8.46 in, 215 mm |
| Limiting Speed - Oil | 3900 rpm |
| Precision Level | Standard (ABEC 1) |
| I.D. | 3.94 in, 100 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| No. in Set | Duplex Set |
| Enclosure | Open |
| Contact Angle | 40 Degree |
| Dynamic Load Rating | 190 kN |
| Static Load Rating [Max] | 41100 lbf |
| Precision | Standard |
| Width | 1.85 in, 47 mm |
| O.D. Type | Cylindrical |
| Cage Type | Metal |
| Internal Design | Universal Mounting |
| Bore Type | Cylindrical |
| Radial Internal Clearance | Normal |
| Outer Ring Width | 1.85 in, 47 mm |
| Lubricant | Oil Preservative |
| Preload Level | Light |
| Temperature Range [Max] | 450 °F |
| Flush Ground | Yes |
| Seal Type | Unsealed |
| Static Load Rating | 190 kN |
| Inner Ring Width | 1.85 in, 47 mm |
| Material | Bearing Steel |
| Locking Device | No Locking Device |
| Cage Material | Brass |
| Inch/Metric | Metric |
| Capacity | Standard Capacity |
| Origin | Single Row Angular Contact |
| Series | 7300P |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| Bearing Type | Unmounted, Angular Contact |
| Limiting Speed - Grease | 3000 rpm |
| icNumber | 7699069 |
| Ball Material | Steel |
| Fillet Radius | 2.5 mm |
| Weight | 19.026 LB |
| EAN or UPC | 97741018173 |
