
- Single Row Angular Contact Bearing, 25 mm ID x 62 mm OD x 17 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Radial Internal Clearance | Normal |
Inch/Metric | Metric |
Ball Material | Steel |
Preload Level | Light |
I.D. | 0.98 in, 25 mm |
Material | Bearing Steel |
Seal Material | None |
Dynamic Load Rating | 26 kN |
Lubricant | Oil Preservative |
O.D. Type | Cylindrical |
Flush Ground | Yes |
Internal Design | Universal Mounting |
Outer Ring Width | 0.67 in, 17 mm |
Precision | Standard |
Limiting Speed - Grease | 11000 rpm |
Contact Angle | 40 Degree |
Cage Material | Brass |
Rows of Balls | Single |
Enclosure | Open |
Temperature Range [Max] | 450 °F |
Precision Level | Standard (ABEC 1) |
Cage Type | Metal |
Locking Device | No Locking Device |
Inner Ring Width | 0.67 in, 17 mm |
Width | 0.67 in, 17 mm |
Static Load Rating | 15.6 kN |
Radial Internal Clearance Specification | Normal Clearance |
Series | 7300PJ |
O.D. | 2.44 in, 62 mm |
Snap Ring | No Snap Ring |
Fillet Radius | 1 mm |
icNumber | 7695885 |
Bore Type | Cylindrical |
No. in Set | Single Bearing |
Limiting Speed - Oil | 14000 rpm |
Origin | Single Row Angular Contact |
Bearing Type | Unmounted, Angular Contact |
Capacity | Standard Capacity |
Seal Type | Unsealed |
Static Load Rating [Max] | 3080 lbf |
Weight | 0.529 LB |
EAN or UPC | 97741017312 |
