Find a Service Center
Alternate Products
MRC Bearing Service
8224
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #104015899
- Single Row Angular Contact Bearing, 120 mm ID x 215 mm OD x 40 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Preload Level | Light |
| Material | Bearing Steel |
| Outer Ring Width | 1.57 in, 40 mm |
| Temperature Range [Max] | 450 °F |
| Lubricant | Oil Preservative |
| Capacity | Standard Capacity |
| icNumber | 7699064 |
| Bore Type | Cylindrical |
| No. in Set | Duplex Set |
| Precision Level | Standard (ABEC 1) |
| Flush Ground | Yes |
| Snap Ring | No Snap Ring |
| O.D. Type | Cylindrical |
| Internal Design | Universal Mounting |
| Contact Angle | 40 Degree |
| Limiting Speed - Grease | 2200 rpm |
| Seal Type | Unsealed |
| Enclosure | Open |
| Precision | Standard |
| Inner Ring Width | 1.57 in, 40 mm |
| I.D. | 4.72 in, 120 mm |
| Dynamic Load Rating | 165 kN |
| Radial Internal Clearance | Normal |
| Cage Material | Brass |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Static Load Rating | 163 kN |
| Seal Material | None |
| Limiting Speed - Oil | 3200 rpm |
| Inch/Metric | Metric |
| Fillet Radius | 2 mm |
| Ball Material | Steel |
| Bearing Type | Unmounted, Angular Contact |
| Width | 1.57 in, 40 mm |
| Origin | Single Row Angular Contact |
| Rows of Balls | Single |
| O.D. | 8.46 in, 215 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Static Load Rating [Max] | 36600 lbf |
| Series | 7200P |
| Weight | 14.315 LB |
| EAN or UPC | 97741017077 |
