
- Single Row Angular Contact Bearing, 70 mm ID x 125 mm OD x 24 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Limiting Speed - Oil | 6000 rpm |
Enclosure | Open |
Width | 24.000 mm |
Precision Level | Standard (ABEC 1) |
Static Load Rating [Max] | 12400 lbf |
Outer Ring Width | 24 mm |
Seal Material | None |
Origin | Single Row Angular Contact |
Material | Steel |
Precision | Standard |
O.D. | 125 mm |
O.D. Type | Straight |
Fillet Radius | 1.5 mm |
Inner Ring Width | 24 mm |
Locking Device | No Locking Device |
Inch/Metric | Metric Bore |
Ball Material | Steel |
Dynamic Load Rating | 14300 lbf |
No. in Set | Single Bearing |
Cage Type | Metal |
Bore Type | Round Bore |
icNumber | 7695856 |
Radial Internal Clearance | Normal |
Cage Material | Brass/Bronze |
Static Load Rating | 60 kN |
Series | 7200PJ |
Bearing Type | Angular Contact |
I.D. | 70 mm |
Contact Angle | 40° |
Rows of Balls | Single |
Radial Internal Clearance Specification | Normal Clearance |
Snap Ring | No Snap Ring |
Temperature Range [Max] | 450 °F |
Seal Type | Unsealed |
Preload Level | None |
Capacity | Standard Capacity |
Internal Design | Universal Mounting |
Lubricant | Oil Preservative |
Limiting Speed - Grease | 4600 rpm |
Flush Ground | Yes |
Weight | 2.683 LB |
EAN or UPC | 97741016711 |
