
- Single Row Angular Contact Bearing, 45 mm ID x 85 mm OD x 19 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Contact Angle | 40° |
Lubricant | Oil Preservative |
icNumber | 7695829 |
Precision Level | Standard (ABEC 1) |
O.D. | 85 mm |
Capacity | Standard Capacity |
Outer Ring Width | 19 mm |
Bearing Type | Angular Contact |
Enclosure | Open |
Dynamic Load Rating | 6900 lbf |
I.D. | 45 mm |
No. in Set | Single Bearing |
Material | Steel |
Internal Design | Universal Mounting |
Rows of Balls | Single |
Precision | Standard |
Static Load Rating [Max] | 5220 lbf |
Inch/Metric | Metric Bore |
Cage Material | Brass/Bronze |
Radial Internal Clearance Specification | Normal Clearance |
Preload Level | None |
Limiting Speed - Grease | 7300 rpm |
Series | 7200PJ |
Fillet Radius | 1 mm |
Cage Type | Metal |
Seal Type | Unsealed |
Radial Internal Clearance | Normal |
Bore Type | Round Bore |
Flush Ground | Yes |
Seal Material | None |
Snap Ring | No Snap Ring |
Width | 19.000 mm |
Origin | Single Row Angular Contact |
Ball Material | Steel |
Limiting Speed - Oil | 9500 rpm |
Inner Ring Width | 19 mm |
Temperature Range [Max] | 450 °F |
Locking Device | No Locking Device |
Static Load Rating | 28 kN |
O.D. Type | Straight |
Weight | 1.003 LB |
EAN or UPC | 97741016520 |
