
- 30 mm ID x 72 mm OD x 19 mm Wide
- Single Shield
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Single-row radial deep groove bearing with no filling notches
- Can carry significant radial loads
- Can carry substantial thrust loads in either direction, even at very high speeds
- Supplied with a pressed steel cage
Outer Ring Width | 19 mm |
Static Load Rating [Max] | 3600 lbf |
I.D. | 30 mm |
Origin | Single Row Radial |
Seal Type | Non-Contact Seals |
Limiting Speed - Sealed | 6300 rpm |
icNumber | 7696378 |
Preload Level | None |
Cage Material | Steel |
Precision Level | Standard (ABEC 1) |
Bore Type | Round Bore |
Rows of Balls | Single |
Pre Lubricant | None |
Seal Material | Metal |
Fillet Radius | 1 mm |
Radial Internal Clearance Specification | Normal Clearance |
Inner Ring Width | 19 mm |
Locking Device | No Locking Device |
O.D. Type | Straight |
Lubricant | Oil Preservative |
Cage Type | Metal |
Enclosure | Single Shield |
Contact Angle | 0° |
Inch/Metric | Metric Bore |
Limiting Speed - Oil | 11000 rpm |
Ball Material | Steel |
Capacity | Standard Capacity |
No. in Set | Single Bearing |
Dynamic Load Rating | 6320 lbf |
Precision | Standard |
Bearing Type | Radial |
Limiting Speed - Grease | 9000 rpm |
Radial Internal Clearance | Normal |
Snap Ring | No Snap Ring |
Material | Steel |
O.D. | 72 mm |
Width | 19.000 mm |
Weight | 0.82 LB |
EAN or UPC | 97741007207 |
