Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5313MZZ

5300-M Medium Series Bearing
Item #110009945
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Double Sealed
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Double Sealed
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Rows of Balls Double
Contact Angle 30°
I.D. 65 mm
Bore Type Round Bore
Temperature Range [Min] -22 °F
Limiting Speed - Sealed 3200 rpm
Enclosure Double Sealed
O.D. Type Straight
Radial Internal Clearance Normal
Cage Material Steel
Precision Level Standard (ABEC 1)
Series 5300M
Capacity Maximum Capacity
Limiting Speed - Oil 4300 rpm
Temperature Range [Max] 250 °F
Precision Standard
No. in Set Single Bearing
Static Load Rating 163 kN
Width 58.738 mm
Lubricant Chevron SRI-2
Origin Double Row Deep Groove
Fillet Radius 2 mm
Snap Ring No Snap Ring
Seal Type Contact Seals
Material Steel
Radial Internal Clearance Specification Normal Clearance
Seal Material Rubber
Static Load Rating [Max] 36600 lbf
Flush Ground No
icNumber 7700310
Ball Material Steel
Preload Level None
Bearing Type Angular Contact
Outer Ring Width 2 5/16 in
Locking Device No Locking Device
O.D. 140 mm
Inner Ring Width 2 5/16 in
Limiting Speed - Grease 3200 rpm
Dynamic Load Rating 34700 lbf
Cage Type Metal
Inch/Metric Metric Bore
Weight 8.534 LB
EAN or UPC 97741015653
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison