Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5312MFF

5300-M Medium Series Bearing
Item #100760719
  • 60 mm ID x 130 mm OD x 2 1/8" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 60 mm ID x 130 mm OD x 2 1/8" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
O.D. Type Straight
Locking Device No Locking Device
Radial Internal Clearance Specification Normal Clearance
Limiting Speed - Sealed 3400 rpm
Inch/Metric Metric Bore
Series 5300M
Enclosure Double Shielded
Static Load Rating 143 kN
Dynamic Load Rating 30200 lbf
Material Steel
Precision Standard
Bore Type Round Bore
O.D. 130 mm
Contact Angle 30°
Capacity Maximum Capacity
No. in Set Single Bearing
Cage Type Metal
Seal Type Non-Contact Seals
Temperature Range [Max] 250 °F
Bearing Type Angular Contact
Origin Double Row Deep Groove
I.D. 60 mm
Width 53.975 mm
Limiting Speed - Grease 3400 rpm
Preload Level None
Inner Ring Width 2 1/8 in
Snap Ring No Snap Ring
Limiting Speed - Oil 4500 rpm
Fillet Radius 2 mm
Radial Internal Clearance Normal
Rows of Balls Double
Ball Material Steel
Precision Level Standard (ABEC 1)
Temperature Range [Min] -22 °F
Seal Material Metal
Flush Ground No
Lubricant Chevron SRI-2
Cage Material Steel
Outer Ring Width 2 1/8 in
Static Load Rating [Max] 32100 lbf
icNumber 7697908
Weight 6.885 LB
EAN or UPC 97741015431
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison